Thông tin chi tiết bộ điều khiển nhiệt độ TZN4M-14R
- Chức năng tự điều chỉnh PID kép:
Tốc độ đáp ứng cao của điều khiển PID để đạt đến giá trị mong muốn nhanh nhất, TZN4M-14R có tốc độ đáp ứng thấp của điều khiển PID để giảm thiểu sự tuột dốc cho dù đáp ứng hơi chậm.
- Độ chính xác hiển thị cao: ±0.3% (bởi giá trị F.S của mỗi ngõ vào)
- TZN4M-14R có 2 chế độ điều khiển tự động
- Có nhiều loại ngõ vào (Chức năng lựa chọn 13 loại ngõ vào): Chức năng lựa chọn: Cảm biến nhiệt độ, Điện áp và Dòng
- Điều khiển nhiệt độ TZN4M-14R có nhiều ngõ ra phụ: Bao gồm LBA, SBA, 7 loại ngõ ra Alarm và 4 loại chức năng Alarm tùy chọn, ngõ ra PV transmission (4-20mADC), Ngõ ra truyền thông RS485.
- Hiển thị dấu thập phân cho ngõ vào Analog
Specification Table
Series |
TZ4SP |
TZN4S |
TZ4ST |
TZ4M |
TZN4M |
TZ4W TZN4W |
TZ4H TZN4H |
TZ4L |
TZN4L |
Power supply |
AC Power |
100-240VAC 50/60Hz |
AC/DC Power※1 |
24VAC 50/60HZ / 24-48VDC |
Allowable voltagerange |
90 to 110% of rated voltage |
Power consumption |
Max. 5VA |
Max. 6VA |
AC: Approx. 8VA, DC: Max. 7W |
- |
AC: Approx. 8VA, DC: Max. 7W |
- |
AC: Approx. 8VA, DC: Max. 7W |
- |
AC: Approx. 8VA, DC: Max. 7W |
- |
Display method |
7Segment LED Display [Process value(PV) : Red, Setting value(SV) : Green] |
Character size(WxH) |
TZ4SP: 4.8×7.8mm TZN4S: PV:7.8×11.0mm SV:5.8×8.0mm |
4.8×7.8mm
|
TZ4M: PV:9.8×14.2mm SV:8.0×10.0mm TZN4M: PV:8.0×13.0mm SV:5.0×9.0mm |
8.0×10.0mm |
TZ4H: 3.8×7.6mm TZN4H: PV:7.8×11.0mm SV:5.8×8.0mm |
PV:9.8×14.2mm SV:8.0×10.0mm |
Input type |
RTD |
DPt100Ω, JPt100Ω, 3wire (allowable line resistance max. 5Ω per a wire) |
Thermocouple |
K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT) (allowable line resistance max. 100Ω) |
Analog |
1-5VDC, 0-10VDC, DC4-20mA |
Control output |
Relay |
250VAC 3A 1c |
SSR |
12VDC ±3V 30mA Max. |
Current |
DC4-20mA(Resistive load Max. 600Ω) |
Sub output |
PV transmission |
- |
PV transmission : DC4-20mA Load max. 600Ω |
EVENT 1 |
250VAC 1A1a |
EVENT2 |
- |
250VAC 1A 1a |
Communication |
- |
- |
RS485(PV transmission, SV setting) |
Control type |
ON/OFF, P, PI, PD, PIDF, PIDS control |
Display accuracy |
F.S. ±0.3% or 3℃, select the higher one |
Setting type |
Front push buttons |
Hysteresis |
1~100℃(0.1 to 100.0℃) variable(ON/OFF control) |
Alarm output hysteresis |
Adjustable ON/OFF 1 to 100 (0.1 to 100.0)℃ of alarm output |
Proportional band(P) |
0.0 to 100.0% |
Intergral time(l) |
0 to 3600 sec. |
Derivative time(D) |
0 to 3600 sec. |
Control time(T) |
1 to 120 sec. |
Sampling period |
0.5 sec. |
LBA setting |
1 to 999 sec. |
RAMP setting |
Ramp Up, Ramp Down at 1 to 99min. |
Dielectric strength |
2,000VAC 50/60Hz for 1min. (between power source terminal and input terminal) |
Vibration |
0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours |
Relay life cycle |
Main output |
Mechanical : Min. 10,000,000 operations, Electrical : Min. 100,000 operations(250VAC 3A resistive load) |
Sub output |
Mechanical : Min. 20,000,000 operations, Electrical : Min. 500,000 operations(250VAC 1A resistive load) |
Insulation resistance |
Min. 100MΩ(at 500VDC megger) |
Noise |
±2kV the square wave noise (pulse width: 1us) by the noise simulator |
Memory protection |
Approx. 10years(When using non-volatile semiconductor memory) |
Environment |
Ambient temperature |
-10 to 50℃, storage: -20 to 60℃ |
Ambient humidity |
35 to 85%RH, storage: 35 to 85%RH |
Approval |
CE, UL, RoHS(TZN4S) |
Unit weight |
TZ4SP: Approx. 136g TZN4S: Approx. 150g |
Approx. 136g |
Approx. 270g |
TZ4W: Approx. 270g TZN4W: Approx. 259g |
Approx. 259g |
Approx. 360g |
※1. AC/DC power type is only for TZ4SP, TZ4ST, TZN4M, TZ4L Series.
※Environment resistance is rated at no freezing or condensation.